Juniper MX480 Hardware Manual page 137

For more information on specific MICs, see
MX Series Interface Module
port—Port number.
NOTE: The MIC number is not included in the interface name.
The MX480 router supports up to six MPCs that install horizontally and are numbered from bottom to
top. Each MPC accepts up to two MICs.
Figure 35 on page 138 shows a 20-port Gigabit Ethernet MIC with SFP installed in slot 0of an MPC in slot 3.
NOTE: The 20-port Gigabit Ethernet MIC with SFP-E has a different port numbering. See Gigabit
Ethernet MIC with SFP (E)
Figure 35: MX480 MIC Interface Port Mapping
The MIC contains two logical PICs, numbered PIC 0 through PIC 1 in the CLI. Each logical PIC contains 10
ports numbered 0 through 9.
"MICs Supported by MX Series Routers" on page 141
Reference.
138
in the