306
Returning a Hardware Component to Juniper Networks, Inc. | 466
Replacing an SSD Drive on an RE-S-X6-64G
Each RE-S-X6-64G Routing Engine supports two solid-state drives (SSD) specified by Juniper Networks.
The RE-S-X6-64G ships with two SSDs installed in the slot labeled DISK1 and DISK2.
Figure 100 on page 306
shows the arrangement of storage drive slots on a RE-S-X6-64G Routing Engine.
Replacing an SSD drive in a RE-S-X6-64G Routing Engine consists of the following two stages:
1. Replacing the SSD Drive in the Routing Engine.
2. Copying vmhost and Junos OS to the replaced SSD.
Figure 100: RE-S-X6-64G Storage Drive Slots