Installing The Mx480; Installing The Mx480 Router Mounting Hardware For A Rack Or Cabinet - Juniper MX480 Hardware Manual

Table 97: Accessory Box Parts List (continued)
Part
ESD wrist strap with cable

Installing the MX480

IN THIS SECTION

Installing the MX480 Router Mounting Hardware for a Rack or Cabinet | 220

Moving the Mounting Brackets for Center-Mounting the MX480 Router | 223
Tools Required to Install the MX480 Router with a Mechanical Lift | 224
Removing Components from the MX480 Router Before Installing It with a Lift | 224
Installing the MX480 Router Using a Mechanical Lift | 229
Reinstalling Components in the MX480 Router After Installing It with a Lift | 232
Tools Required to Install the MX480 Router Without a Mechanical Lift | 237
Removing Components from the MX480 Router Before Installing It Without a Lift | 237
Installing the MX480 Chassis in the Rack Manually | 244
Reinstalling Components in the MX480 Router After Installing It Without a Lift | 246
Installing the MX480 Router Cable Management Bracket | 251
Installing the MX480 Router Mounting Hardware for a Rack or Cabinet
The router can be installed in a four-post rack or cabinet or an open-frame rack. Install the mounting
hardware on the rack before installing the router.
Install the mounting shelf, which is included in the shipping container, before installing the router. We
recommend that you install the mounting shelf because the weight of a fully loaded chassis can be up to
128 lb (58.1 kg).
Table 98 on page 221 specifies the holes in which you insert cage nuts and screws to install the mounting
hardware required (an X indicates a mounting hole location). The hole distances are relative to one of the
Quantity
1
220