Troubleshooting The Mx480 Power System - Juniper MX480 Hardware Manual

user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
Slot 2 Online
PIC 0 Online
PIC 1 Online
Slot 3 Online
PIC 0 Online
PIC 1 Online
Slot 4 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
For further description of the output from the command, see the
SEE ALSO
MX480 Flexible PIC Concentrator (FPC) Description | 119
Replacing an MX480 PIC | 369
Maintaining MX480 PICs | 368
MX480 PIC Serial Number Label | 461

Troubleshooting the MX480 Power System

Problem
Description: The power system is not functioning normally.
Solution
Check the LEDs on each power supply faceplate.
If an AC power supply is correctly installed and functioning normally, the AC OK and DC OK LED's
light steadily, and the PS FAIL LED is not lit.
DPC 40x 1GE R
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
MX FPC Type 3
1x OC-192 SONET
1x OC-192 SONET
MS-DPC
MS-DPC PIC
MS-DPC PIC
MPC Type 2 3D EQ
1x 10GE XFP
1x 10GE XFP
MPC 3D 16x 10GE
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
CLI Explorer.
447