Juniper MX480 Hardware Manual page 436

Check the OK/FAIL LED on the FPC and OK and FAIL FPC LEDs on the craft interface. When the FPC
is online and functioning normally, the OK LED lights green steadily.
Issue the show chassis fpc command to check the status of installed FPCs. As shown in the sample
output, the value Online in the column labeled State indicates that the FPC is functioning normally:
user@host> show chassis fpc
Temp
Slot State (C)
0 Online 24
1 Empty
2 Online 41
3 Online 43
4 Online 43
5 Online 41
6 Online 43
7 Empty
8 Empty
9 Empty
10 Online 24
11 Empty
NOTE: The show chassis fpc command displays the status of the FPCs.
For more detailed output, add the detail option. The following example does not specify a slot number,
which is optional:
user@host> show chassis fpc detail
Slot 0 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Slot 2 information:
State
Temperature
Total CPU DRAM
CPU Utilization (%)
Total Interrupt
3 0
9 0
5 0
11 0
9 0
5 0
3 0
24 degrees C / 75 degrees F
1024 MB
128 MB
2048 MB
29 degrees C / 84 degrees F
1024 MB
Memory Utilization (%)
DRAM (MB) Heap
1024 13
1024 15
1024 16
1024 16
1024 15
1024 16
1024 13
Online
2008-12-11 16:53:24 PST
15 hours, 2 minutes, 47 seconds
Online
Buffer
21
57
57
57
57
57
21
441