United States; Compliance Statements For Environmental Requirements; Compliance Statements For Nebs; Compliance Statements For Acoustic Noise For The Mx480 Router - Juniper MX480 Hardware Manual

United States

The hardware equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, might cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.

Compliance Statements for Environmental Requirements

Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in
this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product
documentation includes instructional information about the proper method of reclamation and recycling.

Compliance Statements for NEBS

The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I), as defined in
GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device
must also be rated based on local electrical code practice.

Compliance Statements for Acoustic Noise for the MX480 Router

The router complies with NEBS Level 3 requirements:
GR-63-CORE: NEBS, Physical Protection
GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment
521