Online Help In Sinumerik Operate - Siemens SINUMERIK 840D sl Operating Manual

Introduction
2.4 Operator interface
Start-up operating area
2.4.15

Online help in SINUMERIK Operate

A comprehensive context-sensitive online help is stored in the control system.
● A brief description is provided for each window and, if required, step-by-step instructions
for the operating sequences.
● A detailed help is provided in the editor for every entered G code. You can also display all
G functions and take over a selected command directly from the help into the editor.
● A help page with all parameters is provided on the input screen in the cycle programming.
● Lists of the machine data
● Lists of the setting data
● Lists of the drive parameters
● List of all alarms
Procedure
Calling context-sensitive online help
58
Protection levels
Keyswitch 3
(protection level 4)
End user
(protection level 3)
End user
(protection level 3)
End user
(protection level 3)
1. You are in an arbitrary window of an operating area.
2. Press the <HELP> key or on an MF2 keyboard, the <F12> key.
The help page of the currently selected window is opened in a sub-
screen.
3. Press the "Full screen" softkey to use the entire user interface for the
display of the online help.
Press the "Full screen" softkey again to return to the subscreen.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal