The Digitizer System In A Nutshell; System Overview - AGFA CR Series Service Manual

DD+DIS155.11E
1

The Digitizer System in a Nutshell

1.1

System Overview

The digitizer is part of the CR system,
consisting of:

Digitizer

Cassette(s) with Image Plate,
CR MD 1.0 General,
format 35 x 43 cm

NX Workstation as of software
version 2.0.8700 / 3.0.8700
(subtypes 100 and 110) or
2.0.8800 / 3.0.8800 (subtypes 200
and 210).

One Processing Station and one
digitizer always belong together.
NOTE:
The digitizer can also be connected to other workstations.
Prerequisite: The workstation needs to support the Agfa proprietary DICOM protocol for
image acquisition. Example for such a workstation: Agfa SE 2.0 Standalone.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
03-2013
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 2 / Page 4 of 19
Type 5151 / 100 / 110 / 200 / 210
Functional Description
Digitizer
Cassette
Figure 1
Figure 2
Agfa Company Confidential
NX Workstation
515100ab.cdr
OK
NOT OK
NOT OK
515100af.cdr