16 | DX-D 60C, DX-D 60G | Introduction to the DR Detector
System Control Unit
The System Control Unit is connected to the DR Detector via the DR Detector
cable.
The System Control Unit is connected to the X-ray generator to synchronize
the exposure, in a configuration with X-ray generator synchronization.
The System Control Unit is connected to the workstation via wired network.
1
Power switch
1.
Status indicator
2.
• Blinking green: starting up
• Green: ready
• Blue: communicating to the detector
Figure 3: System Control Unit (SCU) and Mini System Control Unit (Mini
SCU)
Related Links
System Control Unit
Mini System Control Unit
Safety directions for the power supply
0294B EN 20190221 1131
2
1
2
WARNING:
Do not use the System Control Unit within the patient's vicinity.
on page 81
on page 82
on page 55