Finalizing The Installation - AGFA CR Series Service Manual

DD+DIS155.11E
4

Finalizing the Installation

The following tables list the mandatory and optional steps to finalize the installation:
#
1
2
3
4
5
6
#
1
2
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
Optional Steps, depending on the local situation
Add windows and NX users.
If required: Configure digitizer and NX for the local network.
Setup connectivity to additional system components (RIS,
PACS, Hardcopy, etc.).
Customize system components according to customer
preferences.
Finalize the workstation installation.
Check software version.
Mandatory Steps
Perform further activities depending on local regulations.
Inform the customer about the digitizer system.
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Section
4.1
4.2
4.3
4.4
4.5
4.6
Section
4.7
4.8
Chapter 1 / Page 10 of 47
Agfa Company Confidential