Accessories - AGFA CR Series Service Manual

DD+DIS170.11E
2.2

Accessories

The following accessories are available for the digitizer:
Item
Cassette set with Image
Plate "CR MD 1.0
General", 35x43 cm
(Genrad & FLFS)
CR Full Body Cassette
Holder
Optional CR Anti-scatter
grid version 2
Optional CR EasyLift
UPS Powerware 5115,
120 V Version
UPS Powerware 5115,
220 V Version
Mobile Kit for CR 10-X
Monitors and PC
Hardware
NX Licenses
Remote Service
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
03-2013
ABC Code
5R3GU
EAUGV
EMUXJ
EJ8V8
EGPSE
EGPTG
Refer to
marketing
information
comment
comment
applicable
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 9 of 24
Type 5151 / 100 / 110 / 200 / 210
Comment
Number of cassettes / image plates are
depending on the individual order
Required for Full Leg / Full Spine option
only
Can be used for digitizer and NX.
For technical specifications refer to
section 8.
To be used in earthquake areas and in
mobile usage. May not be used in military
vessels.
The released monitors and PC hardware is
See
listed in following document on the Agfa
HealthCare Library:
CR/DR Interoperability Matrix, Document
ID 31333326
For sales ABC codes refer to the relevant
sales information.
See The available NX licenses are published on
the Agfa HealthCare Library. Example
document: Licensing NX 8700, Document
ID 38260259
Not In general it is possible to diagnose and
repair the digitizer to a certain extent
remotely. Remote Access is established via
the Agfa own Secure Remote Service
System (SRSS). For more information to
the SRSS see Agfa HealthCare Library*:
<Technical Services  Service
Delivery  SRSS>
Installation Planning
(Intranet Link / Extranet
(Intranet Link / Extranet
Agfa Company Confidential
1 2 3
Link).
Link)