Functional Data Of The Optional Ups; Heat Emission; Acoustic Noise Level; Boot-Up Time And Warm-Up Time - AGFA CR Series Service Manual

DD+DIS170.11E
8.4

Functional Data of the optional UPS

Rated voltage [~V] UPS Powerware
5115-750 (ABC Code: EGPSE)*
Rated voltage [~V] UPS Powerware
5115-750i (ABC Code: EGPTG)*
Frequency [Hz]
Battery runtime [min]
Output Power [W]
Dimensions (HxWxD) [mm/in]
Weight [kg/lb]
More info
8.5

Heat Emission

Heat emission type 5151 / 100
and 110 [W / BTU per hour]
Heat emission type 5151 / 200
and 210 [W / BTU per hour]
8.6

Acoustic Noise Level

Acoustic Noise Level
according ISO 7779
8.7

Boot-up Time and Warm-up Time

Boot-up time and Warm-up time
Warm-up time "cold start"
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
03-2013
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 20 of 24
Type 5151 / 100 / 110 / 200 / 210
Installation Planning
120 = Default
110 = User adjustable via rear panel
DIP switches
230 = Default
220 or 240 = User adjustable via rear
panel DIP switch
50/60 (autosensing)
> 5
750
192 x 150 x 270 / 7.6 x 5.9 x 10.6
7.8 / 17.2
Refer to www.powerware.com
Standby: 41 / 140
Average during 65 / 222
scan:
Standby: 22 / 75
Average during 78 / 266
scan:
During scanning:
Approximately 3 minutes
Image quality within specification
after boot-up time
65 dB(A) maximum
Agfa Company Confidential
1 2 3