Error Viewer Installation - AGFA CR Series Service Manual

DD+DIS155.11E
2.4.6

Error Viewer Installation

The menu "Error Viewer Installation" allows to install the error viewer on the connected
Purpose
PC from the browser.
(1) If the error viewer is already installed
Usage
on the NX workstation, i.e. if the error
viewer icon is present on the task bar:
De-install the error viewer in Control
Panel > Programs and
features
(2) Select service menu: <Error Viewer
Installation>
(3) Click:
<ErrorViewerInstaller.msi>
(4) Follow the further instructions.
NOTE:
The error viewer installation is also part of the installation procedure of the digitizer.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
03-2013
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 18 of 31
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Tools and auxiliary Means
Figure 13
Agfa Company Confidential