Software Release Arc_1404 - AGFA CR Series Service Manual

DD+DIS155.11E
6

Software Release ARC_1404

Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
* On the Agfa HealthCare Library only the latest software release can be downloaded.
NOTE:
Software ARC_1404 is the first software which supports also the three digitizer
subtypes 110, 200 and 210 that were introduced in 04-2013.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
04-2013
04/2013
Software ARC_1404 is installed in following digitizers ex
factory.
Type
5151/100
5151/110
5151/200
5151/210


The NX workstation connected to the digitizer requires:


For additional system component compatibility
information refer to following documents:


DD+DIS084.13E, Service Bulletin No. 10, Software
ARC_1404 available
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.8 / Page 11 of 13
Type 5151 / 100 / 110 / 200 / 210
Software Releases and Patches
SNs
SN ≥ 2.500 and additionally in SN 2.342
and 2.497
SN ≥ 20.001
SN ≥ 30.001
SN ≥ 40.001
Agfa HealthCare Library*
USB flash drive, delivered with the digitizer
For type 5151/100 and 110 software ≥ NX 2.0.8700 /
3.0.8700.
For type 5151/200 and 210 software ≥ NX 2.0.8800 /
3.0.8800.
Solution Structure Data Document, Document ID*
30781759 (Intranet Link
CR/DR Interoperability Matrix, Document ID*
31333326 (Intranet Link
(Intranet Link
Repair and Service
/ Extranet Link)
/ Extranet Link)
/ Extranet Link)
Agfa Company Confidential