Safety Notes For Corrective Maintenance Work; Safety Notes When Working At The Erasure Unit; Safety Notes When Working At Pmt With Light Collector - AGFA CR Series Service Manual

DD+DIS155.11E
3.5

Safety Notes for corrective Maintenance Work

3.5.1

Safety Notes when working at the Erasure Unit

WARNING:
During operation the Erasure Unit is hot: Risk of burns.

Avoid contact with the Erasure Unit.

Observe the relevant sticker on the Erasure Unit.
CAUTION:
Sensitive surface. Reduced image quality possible due to clouded reflector.

Do not touch the reflector of the erasure unit by hand.

Do not use cleaning agents to clean the reflector.

Only use a lint-free cloth for cleaning.
3.5.2

Safety Notes when working at PMT with Light Collector

CAUTION:
The PMT light sensitivity decreases for a certain time (hours to days) if
exposed to bright light.
Expose the light sensitive side of the PMT as little as possible to daylight.
CAUTION:
The light collector can break when mechanically stressed.
Handle the light collector with great care.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2013
Safety Guidelines / General Repair Instruction
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 3.1 / Page 9 of 11
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Agfa Company Confidential