Unpacking The Nx Workstation And Monitor; Checking The Shipment Completeness - AGFA CR Series Service Manual

DD+DIS155.11E
(4) Unpack the digitizer. The unpacking instructions are printed on the digitizer box.
Figure 2 shows an example of the unpacking instructions.
Foot protection Hand protection
DD+DIS201.12E
Document ID: 34000110
Revision 0
08-2012 Printed in Germany
2.3

Unpacking the NX Workstation and Monitor

(1) Unpack all boxes of the NX Workstation delivery.
2.4

Checking the Shipment Completeness

(1) Compare the scope of delivery with the packing lists, where available.
Example for digitizer packing list:
Quantity Description
* Language: Bulgarian, Chinese simplified, Chinese traditional, Czech, Danish, Dutch, English,
Estonian, Finnish, French, German, Greek, Hungarian, Italian, Korean, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Slovenian, Spanish, Swedish, Thai,
Turkish.
(2) In case the delivery is not complete, escalate to the next support level.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
A B
4
2
5
Device
Type
ABC-Code
SN
Delivery
1 Note
1 Digitizer
1 Packing list for accessory
1 CE declaration of conformity
1 Installation Document
1 External power supply
1 Power cable, Europe 3.00 m
1 Power cable, US 3.00 m
1 Network cable 5 m / 16 feet long
1 1.5 mm CU filter
1 Torx key TX20
1 CD with User Manuals in all specified languages*
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
C D
6
3
7
30 kg
66 lbs
(
*
* Optional:
Depends on
national regulations.
Figure 2
E
Chapter 1 / Page 6 of 47
Agfa Company Confidential