Known Software Issues Of Software Arc_1201 - AGFA CR Series Service Manual

DD+DIS155.11E

Photomultiplier flash memory errors are repaired automatically: The software
doesn't crash anymore if the Photomultiplier flash memory is corrupted.

Galvo adjustment is optimized: The adjustment is checked and repeated once per
minute if required.

Infocounter values like installation/manufacture date and machine running time are
corrected.

Image is not lost anymore for following special case:
- Network is disconnected during scan and
- Cassette is not removed after scan and
- Digitizer is switched off afterwards
2.2

Known Software Issues of Software ARC_1201

When running service menu "Endurance run" without scanning or without erasing: The
status is not updated. It remains on "feeding IP".
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
04-2013
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.8 / Page 6 of 13
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Software Releases and Patches
Agfa Company Confidential