AGFA CR Series Service Manual page 75

DD+DIS155.11E
(65) Enter the data in the Device Configuration  Digitizer 
Emergency Procedure window according to the customer needs.
The following table just shows examples:
#
1
2
3
Following two steps are for CR 12-X only:
(66) Select in the NX Configuration Tool Menu:
User Interface  Identification Configuration  Edit
Image Details
(67) In dropdown box Content, add label Scan Resolution.
NOTE:
With scan resolution parameter enabled in the NX "Edit Image Detail" window, the user
can switch scan resolution before scanning.
The default scan resolution settings are defined in the digitizer configuration window.
Recommendation: Leave settings on default.
For more information see also Application Note NX 2.0.8800 / 3.0.8800,
Document ID 39248556.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
Parameter
Age Group:
Exam Group:
Exposure Type:
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Value
17+
Carpus (Knee)
DLPMO Left
Figure 54
Agfa Company Confidential
Chapter 1 / Page 39 of 47