DD+DIS155.11E
4.1
Adding Windows and NX Users
NOTE:
After NX activation the NX workstation has one service user "crservice" configured. The
CR 10-X / CR 12-X configuration wizard additionally installs a standard user "Agfa".
The service user has Windows administrator rights as well as Service Engineer Rights
on NX.
If required, create additional users with NX operator rights.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 6
Agfa Company Confidential
Chapter 1 / Page 11 of 47