DD+DIS155.11E
NOTE:
The digitizer status is indicated via static
or blinking blue, green and red LEDs.
For an explanation of LED modes refer
to Service Manual chapter 3.4, Electrical
and mechanical Codes, Fuses, LEDs.
For an explanation of the boot-up
procedure refer to Service Manual
chapter 2, Functional Description.
1
(4)
On the NX go to:
Control panel
Set:
View by: Small Icons
(5)
Select: Control panel
Date and Time.
(6)
Adapt the time zone.
(7)
Adapt date and time.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Status
Indicator
Figure 21
Figure 22
Figure 23
Chapter 1 / Page 24 of 47
Agfa Company Confidential
515101ag.cdr