DD+DIS155.11E
1
Software Release ARC_1103
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
1.1
Features of Software ARC_1103
Software ARC_100X contains all features which are required to perform the functions
as specified in the "Intended Use" statement.
For more information to the "Intended Use" statement refer to CR 10-X Service Manual
chapter 3.1, Safety Guidelines / General Repair Instruction.
1.2
Known Software Issues of Software ARC_1103
In some cases wrong or incomplete error messages are displayed.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
04-2013
03/2012
Type 5151 / 100: SN ≥ 1000
USB flash drive, delivered with the digitizer
The NX workstation connected to the digitizer requires
software ≥ NX 2.0.8700 / 3.0.8700.
For additional system component compatibility
information refer to following documents:
None
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.8 / Page 4 of 13
Type 5151 / 100 / 110 / 200 / 210
Software Releases and Patches
Solution Structure Data Document, Document ID*
30781759
(Intranet Link
CR/DR Interoperability Matrix, Document ID*
31333326
(Intranet Link
Repair and Service
/
Extranet
Link)
/
Extranet
Link)
Agfa Company Confidential