Intended Use; Labels In And On The Device; Labels In The Rear - AGFA CR Series Service Manual

DD+DIS155.11E
1

Intended Use

The digitizer is part of a CR system, further containing a cassette, image plate and
modality workstation. The CR system is used in a radiological environment by qualified
staff to read-out, process and route static X-ray radiographic images.
The cassette is used to protect the image plate from light and damages during X-ray
exposure, transport and handling.
The image plate is used to capture the static X-ray radiographic images; the image
plate is scanned by the digitizer.
The digitizer is used to scan an X-ray exposed Image Plate; it results into a digital
image which is sent to the dedicated workstation.
The modality workstation is used to process and route the digital images from the
digitizer.
2

Labels in and on the Device

2.1

Labels in the Rear

On the rear cover of the digitizer following labels are available:

Type Label

User safety related labels

Certification related labels
For the meaning of the different labels refer to the user manual.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2013
Safety Guidelines / General Repair Instruction
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 3.1 / Page 4 of 11
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Agfa Company Confidential