Setup Of Connectivity To Additional System Components; Customizing System Components According To Customer Preferences; Finalizing The Workstation Installation - AGFA CR Series Service Manual

DD+DIS155.11E
(20) In service menu <Backup> select:
<Complete backup> and <SAVE
TO USB Digitizer>.
(21) Select: <Logout>
4.3

Setup of Connectivity to additional System Components

(1) Use the corresponding connectivity release documents for setup of additional
system components, see Agfa HealthCare Library path*:
<General Info  Connectivity & Application>
4.4

Customizing System Components according to Customer Preferences

(1) Use the corresponding connectivity release documents and service manuals of
the system components for instructions how to customize the system
components.
4.5

Finalizing the Workstation Installation

(1) Finalize the workstation installation as described in NX Service Manual
Chapter 4, sections "NX Configuration via Configuration Tool" and "Completing
the Installation".
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 14
Chapter 1 / Page 17 of 47
Agfa Company Confidential