Safety Notes When Working At The Slow Scan Drum - AGFA CR Series Service Manual

DD+DIS155.11E
CAUTION:
Finger prints on the mirror before the Light Collector may cause reduced image
quality.
Be careful not to touch the mirror.
3.5.3

Safety Notes when working at the Slow Scan Drum

CAUTION:
The magnetic surface of the slow scan drum may damage sensitive parts or
attract small metallic parts.

Keep away all parts which are sensitive for strong magnetic fields, e.g. bank cards.

Ensure that no small metallic parts stick at the slow scan drum, e.g. screws,
metallic splinters.
CAUTION:
The Slow Scan Drum has a sensitive surface. Reduced image quality or image
plate jams possible.
Handle the Slow Scan Drum carefully.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2013
Safety Guidelines / General Repair Instruction
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 3.1 / Page 10 of 11
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Mirror before Light Collector
515131ak.cdr
Figure 4
Agfa Company Confidential