DD+DIS170.11E
1
Product Description
This document describes the installation planning of the digitizers type 5151, subtypes
100, 110, 200 and 210.
For the installation planning of the complete system it is additionally required to perform
all steps described in the NX Workstation Installation Planning document.
Refer to the Agfa HealthCare Library:
Computed Radiography CR Workstation Software
1.1
System Overview
The digitizer is part of a CR system,
consisting of:
Digitizer
Cassette(s) with Image Plate,
CR MD 1.0 General,
format 35 x 43 cm
NX Workstation as of software
version 2.0.8700 / 3.0.8700
(subtypes 100 and 110) or
2.0.8800 / 3.0.8800 (subtypes 200
and 210).
One Processing Station and one
digitizer always belong together.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
03-2013
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 6 of 24
Type 5151 / 100 / 110 / 200 / 210
Installation Planning
Digitizer
Cassette
Figure 1
Figure 2
Agfa Company Confidential
1
2
3
NX Workstation
515100ab.cdr
OK
NOT OK
NOT OK
515100af.cdr