Advertisement
Quick Links
Advertisement
Related Manuals for AGFA CRHD5.0
Summary of Contents for AGFA CRHD5.0
- Page 1 Cleaning the image plate of CR HD5.0, CR MD4.0R, CR HM5.0 and CR MM3.0R 0042A EN 20170718 1541...
- Page 2 200 cycles (whatever comes first). Permitted cleaning products? • For CR MD4.xR and CR HD5.x, only use AGFA CR Phosphor Plate Cleaner and a soft lint-free cellulose cloth or Polynit wipes to clean the plate. • For CR MM3.xR and CR HM5.x, only use AGFA CR Phosphor Plate Cleaner and Polynit wipes to clean the plate.
- Page 3 Agfa certified dealer to clean the plate. Note: In a mixed environment with old and new CR MM3.xR plates it is recommended to use only PROSAT wipes purchased from Agfa or an Agfa certified dealer to clean the plates. How to clean the image plate? To clean the image plate: 1.
- Page 4 4 | Cleaning the image plate of CR HD5.0, CR MD4.0R, CR HM5.0 and CR MM3.0R | Cleaning the Image Plate 6. Clean the image plate as follows: • Take an appropriate wipe or moisten the cloth with cleaner and wipe the image plate surface softly and evenly.
- Page 5 Cleaning the image plate of CR HD5.0, CR MD4.0R, CR HM5.0 and CR MM3.0R | Cleaning the Image Plate | 5 White phosphor side Black tube side of the cassette Warning: Make sure to slide in the image plate carefully. Do not let the plate fall down vertically into the cassette! This causes damages of the phosphor.