DD+DIS155.11E
1.6
Main Functions of the NX Workstation
The NX Workstation is a CR workstation. It is used for:
Acquiring images from the digitizer.
Acquiring patient and examination data either by manual input or from a worklist
provided by a RIS (Radiologic Information System).
Combining patient and examination data with the acquired image.
Performing automatic Musica (Multiscale Image Contrast Amplification) Image
Processing based on predefined, examination based parameters
Modifying the image appearance of acquired images
Performing quality control of the images of the X-Ray department
Transferring images for diagnosis to a hardcopy printer or softcopy station and
to a PACS (Picture Archiving and Communication System) system for archiving
Burning images on CD ROM
X-Ray Modality
For more information refer to the NX workstation service manual.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
03-2013
DICOM
"Manual" Data Transfer
Cassette
Digitizer
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 2 / Page 8 of 19
Type 5151 / 100 / 110 / 200 / 210
Functional Description
NX Workstation
CD ROM
Figure 6
Agfa Company Confidential
PACS
Softcopy
Hardcopy
515102bd.cdr