Performing A Quality Control - AGFA DR 100s User Manual

94 | DR 100s | Basic Workflow

Performing a quality control

In NX:
1. Select the image on which quality control is to be performed.
2. Prepare the image for diagnosis by using e.g. L/R markers or annotations.
3. If the image is OK, send the image to a hardcopy printer and/or PACS
(Picture Archiving and Communication System).
Related Links
Connecting DR 100s to a wired network
0411D EN 20220627 1040
Note: If you use a wired network, NX can only send images if
the network cable is plugged in.
Note: If you use a wired network, NX may display error
messages while working unplugged because it cannot send
images. To prevent error messages being displayed, halt the
send queue and restart it when plugging in the network cable.
Refer to the NX User Manual.
on page 164