Installation; Storage Of Allen Wrench - AGFA DX-D 100 User Manual

Installation

On a configuration with multiple wireless DR Detectors of the same type, it is
required to apply labeling to the DR Detector containing a unique nickname
for each DR Detector. The nicknames must be configured on the NX
workstation. The DR Detector Switch shows which DR Detector is active and
shows its status, by means of the nickname of the DR Detector.

Storage of Allen wrench

The unit is delivered with an Allen wrench that is used to uncouple the wheels
from the motors in order to move the unit manually. Store the Allen wrench
on a fixed location in or near the unit, where it can be easily retrieved in case
the motorized movement fails and the unit must be moved manually. The
preferred location is the storage bin. On the configuration with wireless DR
Detector, the Allen Wrench can be stored in the slot where the protective bags
are stored.
Related Links
Storage bin on page 24
CAUTION:
Selecting the wrong DR detector can cause the need to retake
the image.
DX-D 100 | Introduction | 33
0187K EN 20191024 1609