Using The Toggle Wifi Button In The Nx Software To Switch Between The Wireless Dr Detector And The Wireless Hospital Network - AGFA DR 10s User Manual

24 | DR 10s | Introduction to the DR Detector
Using the Toggle Wifi button in the NX software to switch
between the wireless DR Detector and the wireless hospital
network
The NX Workstation can be configured to use a wireless DR Detector and to
connect to a wireless hospital network.
In a configuration without a wireless access point that is connected to the
workstation, the DR Detector communicates via the internal wireless adapter
of the workstation and only one connection can be active at a time.The user
must manually switch between the wireless connection to the hospital
network and the wireless connection to the DR Detector.
To switch between wireless networks:
1. Press the Toggle Wifi button in the NX software.
The name and location of the button depends on the configuration.
Toggle Wifi
Toggle Wifi
Toggle Wifi
Toggle Wifi
Toggle Wifi Toggle Wifi
Toggle Wifi Toggle Wifi
Figure 7: Action button to switch between wireless networks
A dialog is displayed indicating which network is currently active.
2. Press the icon representing the other netwok to activate it.
Table 1: Status of the wireless network
0351A EN 20190319 1349 *
Toggle Wifi
Toggle Wifi
Toggle Wifi Toggle Wifi
The NX Workstation is connected to the DR Detector to
make exposures.
No communication to the hospital network is possible, e.g.
to RIS or PACS.
The NX Workstation is connected to the hospital network to
retrieve data from the RIS or to print or archive images.
No communication to the DR Detector is possible, no expo-
sures can be performed.