Cassette Release Button Pressed Before End Of Cycle - AGFA CR Reader User Manual

CR Reader, CR Advanced Reader, CR Multiformat Reader | Operating CR Reader, CR Advanced

Cassette release button pressed before end of cycle

Details
Cause
Solution
The following error message is displayed in the Digitizer Re-
mote Display:
Do not press the cassette release button before end of cycle.
Please clamp the cassette again by pushing it towards the
digitizer. Restart the digitizer.
You pressed the cassette release button before the end of the
cycle.
Do not press the cassette release button before the end of the
cycle. If you did, clamp the cassette again by pushing it to-
wards the digitizer and restart the digitizer.
Reader and CR Multiformat Reader | 67
2591D EN 20191028 1712