Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 Active
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 Active
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Workday/
Weekend Selection
Coverage Check
1)
In this case, the protocol Modbus TCP can control tariff 1 to tariff 8. Refer to the System Manual SICAM
Q100, chapter 2.2.7.18 Register 0154: Tariffs (read and write), order number E50417-C1040-C522.
2)
This synchronization source can only control tariff 1 or tariff 2.
3)
The default settings of Tariff 1 Period 1 Active for 2 seasons are checked.
16.4.3
Energy Upper Limit
Parameter
Energy Upper Limit
16.4.4
Energy Freeze and Record
Parameter
Interval
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
3)
No
No
Every Day
Default Setting
Energy Counter
Default Setting
10 minutes
Yes
No
Yes
No
Every Day
Workday
Weekend
Pass
Fail (with gap)
Fail (with overlap)
Setting Range
Energy Counter
Energy Value
Setting Range
10 minutes
15 minutes
30 minutes
60 minutes
16 Operating Parameters
16.4 Energy Management
411