Siemens SICAM Q100 7KG95 Series Manual page 152

9 Operation at Use of a PC
9.2 Start and Design of the User Interface
Error Log
NOTE
The information about error messages described below is intended for service purposes. Inform the customer
service about this information when there are problems with your device.
To display the error messages, proceed as follows:
✧
In the navigation window, click the Message Logs menu and then Error log.
The error messages are listed in the input/output window as follows:
Figure 9-13

Serial No.

Date of registration

Time of registration

Relative time (referring to the start of operation, output in milliseconds)

Task, Code and Location are service information for the manufacturer.

Description of the error
NOTE
The error messages can be printed as described in chapter 9.2.7.2, section File Download  Open.
The chapter 9.5.4.2 explains how to delete the error messages manually.
152
Information Tab, Error Log
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019