Access Rights - Siemens SICAM Q100 7KG95 Series Manual

7 Getting Started

7.5 Access Rights

7.5 Access Rights
Access Rights for Configuration and Maintenance
Access rights are determined by the role types configured in the chapter 6.2.2. If you are configured as a role
of Administrator or User Account Manager, you will have the full access rights for configuration, maintenance,
updates.
Access Rights for Communication
The access rights for the communication via Ethernet with Modbus TCP protocol are made for port 502 and
for the user port. You can assign either full access rights or read-only authorization; chapter 9.3.7.2 describes
the settings.
You can also determine the access rights for serial communication using the Modbus RTU protocol. You can
assign either full access rights or read-only authorization; chapter describes the settings.
No access rights are required when serial communicating via the IEC 60870-5-103 protocol.
Communication via Ethernet with IEC 61850 server protocol and serial communication with
IEC 60870-5-103 protocol do not require any access rights.
120 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019