Siemens SICAM Q100 7KG95 Series Manual page 372

13 Failures and LED Indications
13.2 Indications Signaled by LEDs
Table 13-1
LED
RUN
H1
372
Indications Signaled by LEDs on the Top Side of the Housing (cont.)
Fallback mode with default IP address
Default address was requested by pressing the F4 softkey during Fallback
mode.
HTTPS certificate is being generated after the IP address is changed.
ERROR
H2
C
Meaning
Fallback Mode
Firmware Upload
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019