Siemens SICAM Q100 7KG95 Series Manual page 284

9 Operation at Use of a PC
9.4 Value View and Evaluation
✧
Click Display.
The determined results are displayed in a Find result table. In multi-paged tables you can navigate forward
and back in the pages using the >> and << buttons.
9.4.2.3 Mains Signaling Voltage
Default Settings and Setting Options
Table 9-47
Start time
End time
Detection time
Measurement output
To display the values on the screen, proceed as follows:
✧
In the navigation window, select the Evaluation and data management menu and click Mains signaling
voltage.
284
Mains Signaling Voltage
Parameter Default Setting
Current time
No setting, only display
-none-
Table
Setting Options
Any with calendar function
Time format: depends on date/time
format config.
Detailed information generated as
the list in the corresponding data
format depending on the
parameterized data type and mains
signaling frequency.
Table
Diagram
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019