13.2
Indications Signaled by LEDs
SICAM Q100 automatically monitors the functions of its hardware, software, and firmware components. The
LEDs on the top side of the housing and on the display side (only in devices with display) indicate the current
device status.
Designation of the LEDs on the Top Side of Housing
RUN
Link/Activity
Figure 13-1
Designation of the LEDs on the Display Side
RUN
Figure 13-2
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
H1
Designation of the LEDs on the Top Side of Housing
H1
Designation of the LEDs on the Display Side
13 Failures and LED Indications
13.2 Indications Signaled by LEDs
ERROR
H2
Speed
ERROR
H2
369