Siemens SICAM Q100 7KG95 Series Manual page 173

9.3.3.1.4 LEDs
Default Settings and Setting Options of the LEDs
Table 9-5LED Settings
RUN
H1
H2
ERROR
Indication inverted
Parameterization of the LEDs
To change the outputs of the LEDs H1, H2, and ERROR, proceed as follows:
✧ In the navigation window, select the Operational parameters menu, then the Process connections
submenu and click LEDs.
Figure 9-31
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
LED Default Setting
Device ready
-none-
-none-
no
Configure Tab, LEDs Input/Output Window
9 Operation at Use of a PC
9.3 Configuration of the Device
Setting Options
Not settable
Acc. to list box
(see chapter 16)
Errors are signaled as parameterized (only
error indications can be parameterized).
Acc. to list box
(see chapter 16)
no
yes
173