General Operating Instructions - Siemens SICAM Q100 7KG95 Series Manual

10 Operation at Use of the Display

10.1 General Operating Instructions

10.1 General Operating Instructions
The SICAM Q100 can be operated both using HTML pages from the connected PC and the softkeys at the
device. This chapter describes the softkey-based operation.
The front softkeys F1 to F4 are used to set parameters, select measured quantities, and enter various settings.
The following table lists the icons which appear on the display when the softkeys are pressed.
Table 10-1
Display of the RMS value
Canceling an action and returning to the action
displayed previously
Displaying the maximum value
Displaying the minimum value
Scrolling up
Scrolling down
Menu selection
Acknowledging the selection
Displaying the table of the value
Displaying the graph
Displaying additional information
Active energy supply
Active energy consumption
Inductive reactive energy
338
Control Functions of the Softkeys
Softkey Functions F1
General Softkey Functions
Special Softkey Functions
F2 F3
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
F4