Siemens SICAM Q100 7KG95 Series Manual page 104

6 Security
6.2 Account Management
Setting the HMI Password
Figure 6-8
To set the HMI password in the Configure tab, proceed as follows:
✧
In the navigation window, select Administrative and click Account management.
✧ Set the HMI password according to the following table:
Table 6-7
Settings
Use HMI password
New password
104
Configuration Tab, HMI Password
Settings for the HMI Password
Default Settings
yes
000000
Setting Ranges
no
yes
6 digital numbers (0 to 9)
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019