Siemens SICAM Q100 7KG95 Series Manual page 271

9.4.1.3 Evaluation of Binary Status
The status of the binary inputs and outputs is checked and displayed as follows:
Figure 9-90
Status Binary Input – Terminals U1/2 and U3/2
Depending on the parameterization (for routing, see chapter 9.3.3.1.2), either the status information or the
source is evaluated.
Status Binary Output – Terminals G1/2 und G3/2
Depending on the parameterized source type (see chapter 9.3.3.1.3), the indications routed to the binary
outputs and/or power meters are evaluated.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Binary Status
9 Operation at Use of a PC
9.4 Value View and Evaluation
271