Siemens SICAM Q100 7KG95 Series Manual page 310

9 Operation at Use of a PC
9.5 Maintenance
9.5.3.2 Date/Time
To set the date and time, proceed as follows:
✧
In the navigation window, select the Presets menu and click Date/time.
Figure 9-126
✧
You can either get the date and time from the connected computer or adjust it manually.
Get PC Date and Time
✧
In the input/output window, click Get PC date/time.
The computer time is displayed in the fields of the input/output window and applied in the device.
Setting the Date and Time Manually (24-hour format)
✧
In the input/output window enter the desired time into the fields Day (format dd), Month (format mm), Year
(format yyyy), Hour (format hh), and Minute (format mm).
✧
Click Set Date/time.
The time you have entered is displayed in the fields of the input/output window and applied in the device.
310
Maintenance Tab, Preset Date/time
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019