Table 9-46
By time
By event
Measurement Source
Measurements
Measurement output
To display the values on the screen, proceed as follows:
✧
In the navigation window, select the Evaluation and data management menu and click Records.
The Records input/output window opens.
Figure 9-99
✧
Select the respective recording settings in the list box according to Table 9-46.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Value View and Evaluation - Records (cont.)
Parameter
Start time
End time
Event list
Value View and Evaluation Tab, Records Input/Output Window, Measurement Recorder
Default Setting
Current time
Any with calendar function
Time format: depends on date/time
format config.
no setting, only display (2 h after start)
Selection of a displayed event
Voltage
Voltage
Va
Va, Vb, Vc
Vab, Vbc, Vca
Table
Table
Diagram
CSV
9 Operation at Use of a PC
9.4 Value View and Evaluation
Setting Options
283