Siemens SICAM Q100 7KG95 Series Manual page 182

9 Operation at Use of a PC
9.3 Configuration of the Device
9.3.4.2 User-Defined Screens
In the User-defined screen menu you can parameterize up to 4 different User screens. Each Screen type
allows you to select whether to display the measured values numerically (2 or 4 measured values) or
graphically and numerically (2 or 3 measured values). To select which of the 4 screens are presently displayed
on the device, you must use the device softkeys and the HTML page.
Default Settings and Setting Ranges
Table 9-9
Parameter
Screen type
Screen name
2 measured values, numerical
Display 1, numerical
Display 2, numerical
4 measured values, numerical
Display 1, numerical
Display 2, numerical
Display 3, numerical
Display 4, numerical
2 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
3 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
Display 3, graph./num.
Display x, graph./num.
(x = 1 to 3)
Min value
Max value
1)
If you have not made any selection, the displays explained in the following do not exist.
182
Settings of User Screens
-none-
USER_SCREEN_x
(x = 1 to 4)
-none-
-none-
-none-
-none-
0.0
10.0
(unit according to
measured value)
Default Setting
1)
-none-
2 measured values, numerical
4 measured values, numerical
2 measured values, graphical + numerical
3 measured values, graphical + numerical
Max. 18 characters
Only English and German letters,
numbers, and special characters are
permitted.
Acc. to list box
(see chapter 16)
Acc. to list box
(see chapter 16)
Acc. to list box
(see chapter 16)
Acc. to list box
(see chapter 16)
The minimum value and maximum value
are defined by the selected parameters
(see chapter 9.3.3.1.1).
Setting Range
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019