Siemens SICAM Q100 7KG95 Series Manual page 263

9.3.7.8 Syslog
In addition to showing audit logs in the Maintenance tab via the user interface, the device supports transmitting
the audit logs to a central log server using Syslog.
Syslog is a well-established internationally implemented standard for message logging.
Syslog allows the separation of the following:
• The software that generates messages
• The system that stores messages
• The software that reports and analyzes messages
Computer system designers can use Syslog for system management and security auditing as well as general
informational, analysis, and debugging messages. Various devices, such as printers, routers, and message
receivers across many platforms use the Syslog standard. For example, a Q100 device works as a device and
a Kiwi Syslog service manager works as a receiver.
9.3.7.8.1 Basic Settings
Default Settings and Setting Ranges of the Syslog
Table 9-42
Parameter
Syslog active
If you set the Syslog active parameter to yes, the following parameters are visible:
Primary Syslog server
Port
Secondary Syslog server
Port
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Settings of the Syslog
No
0.0.0.0
514
0.0.0.0
514
Default Setting
No
Yes
Any
0 to 65 535
Any
0 to 65 535
9 Operation at Use of a PC
9.3 Configuration of the Device
Setting Range
263