Siemens SICAM Q100 7KG95 Series Manual page 356

10 Operation at Use of the Display
10.4 Parameterization
Table 10-9
Activated
Unit ID of this device
1)
Retry limit
Response timeout
1)
These values are necessary if no Modbus slave device has been configured for the requested Unit ID. If
a Modbus slave device was configured, its values are used.
356
Modbus TCP/RTU Gateway Settings
Parameter
1)
Default Setting
no no
yes
255 1 to 255
2 0 to 10
50 ms (1 to 6 000) * 10 ms
= 10 ms to 60 s
Setting Range
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019