Siemens SICAM Q100 7KG95 Series Manual page 331

✧
On the Configure tab configure the Serial communication menu item (see chapter 9.3.7.3) as follows:
Figure 9-145
✧
On the Configure tab set the Communication Ethernet menu item (see chapter 9.3.7.2) according to
the configuration specified by the system operator, for example as follows:
Figure 9-146
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Configure Tab, Serial Communication Example
Configure Tab, Communication Ethernet Example
9.7 Example of a Parameterization and Measured Value Evaluation
9 Operation at Use of a PC
331