Table of Contents
Advertisement
13 Failures and LED Indications
13.1 General Inspection
13.1
General Inspection
Visual Inspection
If function failures occur, first check the device visually. Observe the following points when inspecting the device
visually:
•
Correct installation of the device as described in chapter 7.2 at the intended location
•
Compliance with the environmental conditions specified in chapter 14.1.4 of the technical data
•
Correct connection of supply voltage and grounding conductors according to chapter 7.3
•
Correct connection of measuring and communication lines according to chapter 7.7.1
Function Checks
Additionally, check the following aspects:
•
Functioning of the display according to chapter 10.2 and good visibility of the display
•
Correct functioning of peripheral devices (e.g. connected PC, series-connected current transformers)
•
Compliance with the system requirements specified in chapter 7.4
•
Compliance with the access rights according to chapter 7.5
•
Compliance with the commissioning sequence of the device according to chapter 7.7
•
Evaluation of the LED failure indications, see chapter 13.2
368
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
- Quick Links:
- Password Management
Hide quick links:
Advertisement
Table of Contents
