Hmi - Siemens SICAM Q100 7KG95 Series Manual

9 Operation at Use of a PC
9.3 Configuration of the Device
9.3.4

HMI

In the Configure tab, you can view and, if necessary, edit the display settings. You can select these parameters
in the HMI menu in the navigation window. The menu contains the following elements:
• Display settings
• User-defined screen
9.3.4.1 Display Settings
Default Settings and Setting Ranges
Table 9-8
Parameter
Contrast
Time until dimmed
Refresh time
Inverse display
Phase label
Parameterizing the Display Settings
To change the properties of the display, proceed as follows:
✧
In the navigation window, select the HMI menu and click LCD Property.
Figure 9-38
✧
Enter the desired values into the fields and select the corresponding parameters in the option fields as
described in Table 9-8.
✧ After the parameterization click Send.
The parameters are transmitted to the device but not enabled yet (passive set of parameters).
180
Display Settings
Default Setting
8
10
1 000
no
(L1,L2,L3)
Configure Tab, Display Settings Input/Output Window
Setting Range
0 to 10
1 min to 99 min
330 ms to 3 000 ms
no
yes
(L1,L2,L3)
(a,b,c)
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019