16.6
Administrative
The following administrative settings are available:
•
Time synchronization
•
Communication Ethernet
•
OPC UA PubSub (MQTT)
•
Communication serial
•
Modbus slave devices 1 to 8
•
SICAM subdevices
•
Device and language
•
Account Management
•
Syslog
16.6.1
Time Synchronization
Source time synchronization
Time zone offset
Daylight Saving Time switchover
DST offset
Start of DST
End of DST
Additional Parameters if the Source is Ethernet NTP (Modbus TCP and IEC 61850)
Primary NTP server IP Address
Secondary NTP server IP Address
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Parameter
Default Settings
Internal
+00:00
yes
+01:00
March
Last week
Sunday
02:00 AM
October
Last week
Sunday
03:00 AM
192.168.0.254
192.168.0.253
16 Operating Parameters
16.6 Administrative
Setting Range
Internal
Ethernet NTP
Fieldbus
-12 to +13 (hours)
(in increments of 0.5 h)
no
yes
0 to + 2 (hours)
(in increments of 0.5 h)
January to December
First week
Second week
Third week
Fourth week
Last week
Sunday to Saturday
0:00 to 23:00 (full hour)
January to December
First week
Second week
Third week
Fourth week
Last week
Sunday to Saturday
0:00 to 23:00 (full hour)
Any
Any
No polling of the NTP server if 0.0.0.0
was entered
419